* # 06 # shows the IMEI (International Mobile Equipment Identity) code for Nokia 6150

* # 0000 # shows the software version your phone

* # 6110 # Try this code if the previous does not work

* # 746025625 # stop Sim-Clock (Mode saves the charge

battery)

This code will only work on phones with software version 5.24.

* # 92702689 # login to a special menu:

* 1: Shows the serial number
* 2: Shows the month and year of production
* 3: Displays (if implemented) information where the phone was bought
* here you can also record information about the sale of the phone (only once)
* 4: 4: Shows the last modified date in the program – if implemented
* 6: Sends all the phones, pictures, sounds from one phone to another (if supported)

Software type: 5.22 (10-11-99) NSM-1

Previous versions:

5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1
V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR appeared again)
V 4.12 NSM-1 (EFR has been removed from this version)
v 4.11 NSM-1 (EFR has been removed from this version)
V 4.02 NSM-1

When dialing code viewer software appears on the screen should be like that either:

5.22

(10-11-99)

NSM-1

1 line: Software version
2: Date of release
3: Shows the type of phone

EFR Enhanced Full Rate Codec (EFR):

Inclusion: Dial * 3370 # and EFR is activated after reloading the phone

(Consumes more power)

Turn Off: Enter # 3370 # and EFR will switch off after handling the phone.

Half Rate Codec:

Inclusion: Dial * 4720 # and Half Rate will be activated after overload phone (reduced power consumption)

Shutting down: Dial # 4720 # and Half Rate will be turned off after the overload phone

Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of information transmitted, but 5% More downloads for your network provider, long conversation with a decline of about 5%

Half Rate Mode worsening the quality of the sound, but unloads the network and allows the provider to pass on it, more calls, long call, while increasing some na30%

Tricks and Power: button Power:

If you briefly press the button Power, to display a profile menu.

If you click once the phone is turned off. Keys up or down you can scroll through and change various settings.

# 54:

Dial 1 #, 2 #…….. 54 # on the keypad (when you are not a menu) and you get a phone number which has been allocated to this key when speed dialing

Call Menu

3 (during a call) if you press and hold down the menu will be 3 seconds then the display shows Call Menu (trasfer, mute etc.)

Speed dialing messages

When you type a message, you must wait several seconds if you want to print a row, two identical letters. Например при наборе слова For example, with a set of words

“Letter”, you should wait before you enter the second letter “t” ..

There will be much faster if you press the # key twice and then “t”.

The Service provider (SP) lock mode is used to bind

SiM phone to a particular card. Although the insert another SIM card phone operator refuses to work, but other cards of the same the operator will work.

All phones Nokia (2110 and above) have four different mode of attachment, which can be used to bind the four maps of the various operators. But the majority of phones activated only one. ( lock 1)

The main code used in mobile phones Nokia:

# pw + (master code) + Y # g

This code is used for verification, activation and removal of attachment to Sim

map (SP-lock).

Use the * key to set p, + and w characters.

‘Y’ may be 1,2,3 or 4, depending on what type of binding you choose.

# pw +1234567890 +1 # for Provider-Lock status
# pw +1234567890 +2 # for Network-Lock status
# pw +1234567890 +3 # for Provider (???)- Lock status
# pw +1234567890 +4 # for SimCard-Lock status

(master code) number nine, based on the IMEI number.

To remove the binding of type 1 type the following code:

# pw + (master code) +1 # g

If you just want to check your phone using any of nine instead of the master code, eg 1234567890

Be careful with this code, because code can be entered only 3 times, then with your phone number may be that neither will happen

Security code information in the IMEI (International Mobile Equipment Identity) provides:

XXXXXX XX XXXXXX X XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type Approval Code (first 2 digits = country code).

FAC = Final Assembly Code (For Nokia FAC = 10).

SNR = Serial Number.

SP = Spare (always SP = 0).

Related posts

• Nokia 8850 Secret Codes (0)
• Nokia 8210 Secret Codes (0)
• Nokia 6230i Copying files (0)
• Nokia phone secret codes (22)
• Nokia 6120 Secret Codes (0)

To do this:

1. Insert the card of another operator.
2. Turn on your phone and hold the button increases the volume of more than 3 sec., Then release and your phone asks PIN-code.
3. Click the button «C»
4. Then press the button several times * and 04 * PIN * PIN * PIN #
5. Phone writes «PIN changed».

Now turn the phone is switched off. If implemented correctly, it will take a card.

Related posts

• Nokia VoIP on N-series and E-series (0)
• Nokia 9110 Secret Codes (0)
• Nokia 6230i Copying files (0)
• Samsung phone codes (1)
• Review Nokia E71: Unlocking Your Business (1)

Nevertheless, the solution is. You need to enable playback of the desired song in media player and turn the player in the background.

Then find the song on the memory card and move the file to your phone.

As a result, a copy of the song will be in your Nokia 6230i, and the memory card.

Related posts

• Nokia 8210 Secret Codes (0)
• Nokia 6150 Secret Codes (0)
• Razlochka Nokia mobile phones (0)
• Nokia phone secret codes (22)
• Nokia 8850 Secret Codes (0)