Asterisk PBX Archive
-
Configuring Linksys PAP2 ATA with Asterisk
Posted on August 28, 2010 | No CommentsThis guide will demonstrate the process of configuring a Linksys PAP2 ATA with Asterisk to make calls between two regular phones. Operating system used in this tutorial is Debian GNU / Linux (etch), kernel version 2.6.18-5-486 was used. Environment used - ATA Linksys... -
How to setup Cisco SPA 301 phone
Posted on July 9, 2010 | No CommentsAs you know, now Sipura is now own by Cisco. So the Cisco recently introduced a new device of 3XX family, this phone device model is Cisco SPA 301. This phone has no LCD, voice interface but it gets IP address automatically, also you... -
Asterisk chan_dahdi
Posted on January 31, 2009 | 4 CommentsSince Asterisk is most famous opensource telephony platforum out there. The main reason of the popularity is its integration various telecoms service through telephony modules and hardware. Hence most of the people confuse when they upgrade their Asterisk and they do not find chan_zap module... -
Corporate Asterisk
Posted on December 27, 2008 | 1 CommentThe British manufacturer of equipment for IP telephony can begin delivery of pre-IP PBX Asterisk. Will this be another step toward widespread use of open source in VoIP? Will Asterisk choice of operators? Digium, a company that promotes Asterisk in the corporate segment, is preparing... -
Asterisk 1.6
Posted on October 18, 2008 | 3 CommentsThe company Digium announced the release of version 1.6.0 asterisk. This is the first official release of version 1.6, differs from the previous 1.4 branch substantial number of new features brief review below. SIP Changes: One of the most significant change is that now SIP... -
Asterisk queues.conf
Posted on August 21, 2008 | 2 CommentsIn Asterisk queues.con file is where we define queues and the way that how to handle the callers. • Reasonable queuing support within Asterisk • Queues can have static or dynamic members • Members can be channels, or Agents • Automatic distribution of calls based... -
Asterisk Redundancy
Posted on May 23, 2008 | No CommentsObtaining a reliable, fault tolerant, highly available system with ASTERISK� has been difficult and nearly impossible especially from the PRI/TDM standpoint. IP based toolsets have been around for a number of years to allow integrators the ability to provide fault-tolerance on the VoIP side of...
